Sorbitol Solution 70% Specification and CoA: Buyer Checklist

Sorbitol solution 70% specification explained: identity data, CoA parameters, documents and incoming IBC checks for food and pharma buyers.

A clear sorbitol solution 70% specification is the starting point for every quality and purchasing team that buys this liquid polyol in bulk. Sorbitol solution 70% (E420, CAS 50-70-4) is used in toothpaste, confectionery, food and pharmaceutical formulations, and its performance depends on a few key values such as dry substance, sorbitol content and reducing sugars. This buyer checklist explains which documents to request, which parameters to review on the specification and the Certificate of Analysis (CoA), and what to check when an IBC arrives at your site.

Why the sorbitol solution 70% specification matters

Liquid sorbitol is sold by concentration, so the numbers on paper translate directly into how much active material you receive and how it behaves in your process. A well-defined specification helps you to:

  • compare offers from different suppliers on the same basis
  • keep viscosity, sweetness and humectancy consistent from lot to lot
  • approve incoming IBCs quickly and with confidence
  • support your own HACCP, GMP and customer audits

The specification defines what the product must meet. The CoA confirms the actual test results of one specific lot. Both documents belong in your supplier file.

Key identity data

Before you look at test results, make sure every document identifies the product without any doubt:

Item What to check
Product name Sorbitol solution 70% (liquid sorbitol, D-glucitol solution)
E number E420
CAS number 50-70-4
EINECS number 200-061-5
Form Clear, colourless, viscous aqueous solution
Packaging IBC of 1,100 kg
Lot number Identical on CoA, label and delivery note

Parameters to review on the specification and CoA

The exact limits depend on the grade and on the standard your application requires. Agree on them with your supplier in writing. These are the parameters most buyers review.

Concentration and composition

  • Dry substance or water content: this defines the “70%” and has a direct effect on viscosity and dosing.
  • Sorbitol content (assay): usually stated on the dry substance. Check which method and basis are used.
  • Reducing sugars: an important value for colour stability, especially in heated products and toothpaste.
  • Total sugars or other polyols: relevant when your recipe needs a defined polyol profile.

Physical properties

  • Appearance: clear, colourless liquid without visible particles.
  • Density or refractive index: quick incoming checks that confirm the concentration.
  • pH: often measured on a diluted sample. Note the dilution stated in the method.

Purity and safety

  • Heavy metals and nickel: limits as required by the E420 food additive specification or the relevant pharmacopoeia.
  • Chlorides and sulphates: common purity parameters on a sorbitol CoA.
  • Microbiology: total aerobic count, yeasts and moulds and specified pathogens, as needed for your application.

Food grade or pharmacopoeia grade?

For food applications, the reference is the EU specification for E420. For pharmaceutical use, your quality team will usually ask for compliance with a specific monograph. If you need a pharmacopoeia grade, name the monograph in your request and check that the specification and CoA refer to it. This avoids discussions after the first delivery.

Documents to request before approval

  • Product specification
  • Certificate of Analysis (CoA) of a recent lot
  • Safety Data Sheet (SDS)
  • Statements your customers ask for, such as allergen or GMO status
  • A sample for your own laboratory tests

At biolla, specification, CoA and SDS are available on request, and samples can be arranged.

Incoming inspection of IBC deliveries

Sorbitol solution 70% from biolla is delivered exclusively in IBCs of 1,100 kg. A short routine at goods receipt saves time later:

  1. Check that the IBC is undamaged and the seal is intact.
  2. Compare the lot number on the label, delivery note and CoA.
  3. Take a sample with a clean, dedicated sampling tool.
  4. Check appearance and confirm the concentration with density or refractive index.
  5. Release the lot only when the results match the agreed specification.

Keep in mind that the viscosity of the solution increases at lower temperatures. Plan pumping and transfer lines accordingly, especially in winter. For more background on handling and applications, read our guide to sorbitol solution 70%.

FAQ

What is the difference between the specification and the CoA?

The specification lists the parameters and limits the product must always meet. The CoA shows the measured results of one specific lot against these limits.

Which value confirms the 70% concentration?

The dry substance or water content on the CoA. At goods receipt, density or refractive index are practical quick checks.

Should I choose the liquid or the powder form?

It depends on your process, dosing equipment and storage. Our comparison of sorbitol solution vs. sorbitol powder helps you decide.

Sorbitol solution 70% from biolla chemicals

biolla chemicals supplies sorbitol solution 70% (E420, CAS 50-70-4) in IBCs of 1,100 kg to food, oral care and pharma manufacturers across Europe from Hamburg. Specification, CoA and SDS are available on request.

See all details on our product page for sorbitol solution 70%.

Get in touch with our team:

Leave a Reply

Your email address will not be published. Required fields are marked *