Microcrystalline Cellulose in Capsules: MCC 101 and 102 as Capsule Filler

Microcrystalline cellulose in capsules: why MCC works as a filler, MCC 101 vs. 102 for capsule filling, formulation tips and a purchasing checklist.

Microcrystalline cellulose in capsules is one of the most common ways formulators fill hard capsules reliably, whether the line runs gelatin or HPMC shells. As a diluent and flow aid, MCC helps turn small amounts of active or nutritional ingredients into a powder fill that runs evenly through capsule filling machines. This guide explains why MCC works in capsule fills, how to choose between MCC 101 and MCC 102, and what purchasing teams should check before approving a supplier.

Why use microcrystalline cellulose in capsules?

Many capsule formulations contain an active ingredient, vitamin or botanical extract in a dose that is too small, too sticky or too poorly flowing to fill on its own. A filler brings the blend up to a practical fill weight and gives it consistent handling properties. Microcrystalline cellulose is widely chosen for this role for several reasons:

  • Inert diluent: MCC is purified, partially depolymerised cellulose and is generally compatible with a wide range of ingredients.
  • Good plug formation: on dosator and tamping-disc machines, MCC compacts into coherent powder plugs that transfer cleanly into the capsule body.
  • Consistent flow: the right grade supports even die and dosator filling, which helps keep fill weights uniform.
  • Blend uniformity: MCC mixes well with fine actives and helps reduce segregation during blending and transfer.
  • Pharmacopoeia grades: MCC 101 and MCC 102 are available in USP, EP and BP quality for pharmaceutical and supplement production.

MCC 101 or MCC 102 for capsule filling?

Both grades are chemically the same material (CAS 9004-34-6). The main practical difference is particle size, which affects flow and how the powder behaves in the filling machine.

Criterion MCC 101 MCC 102
Particle size Finer Coarser
Flow behaviour Lower, benefits from flow aids Better free flow
Typical capsule use Granulated fills, blends with fine actives Direct powder fills on high-speed machines
Blending with fine powders Very good contact with fine particles Good, may need checks for segregation

As a rule of thumb, MCC 102 is often the starting point for direct powder fills where flow is critical, while MCC 101 suits granulated fills or blends where fine particle contact matters. Many formulators test both grades during development and select the one that gives the most stable fill weight on their own equipment. For a deeper grade comparison, read our article on MCC 101 vs. MCC 102.

MCC 101 vs. MCC 102: Which grade to choose

Formulation tips for MCC capsule fills

Add a lubricant

Capsule fills based on MCC usually need a small amount of lubricant to prevent powder sticking to dosators and tamping pins. Magnesium stearate is the most widely used option. Add it in a short final blending step, because over-blending can affect plug quality and dissolution behaviour. Our guide on magnesium stearate in capsules covers this step in more detail.

Magnesium stearate in capsules: role, use levels and blending tips

Match fill weight and capsule size

The bulk density of the blend determines how much powder fits into a given capsule size. Check bulk and tapped density of the final blend early, so you select a capsule size that leaves room for the target fill weight.

Control moisture

MCC contains a small amount of bound moisture. For moisture-sensitive actives or HPMC shells, review the loss on drying value on the CoA and keep bags tightly closed after opening.

Run small trials first

Fill behaviour depends on the machine type, speed and dosing principle. Short trials with each candidate grade quickly show which blend gives the most consistent weights.

Quality checklist for purchasing MCC

Before approving a microcrystalline cellulose supplier for capsule production, purchasing and QA teams usually review the following documents and parameters:

  • Specification and Certificate of Analysis (CoA) for each batch
  • Pharmacopoeia compliance (USP, EP, BP) as required by your market
  • Safety Data Sheet (SDS)
  • Production under an ISO 9001 quality management system
  • Identity data: CAS 9004-34-6, EINECS 232-674-9
  • Packaging and shelf life: 20 kg bags, 24 months shelf life

Our microcrystalline cellulose specification checklist explains the key CoA parameters step by step.

Microcrystalline cellulose specification and CoA checklist

FAQ: microcrystalline cellulose in capsules

Can MCC be used in both gelatin and HPMC capsules?

Yes. MCC is used as a filler in both hard gelatin and HPMC capsules. For HPMC shells, formulators often pay extra attention to the moisture content of the blend.

Is MCC 101 or MCC 102 better for capsules?

Neither is better in general. MCC 102 offers better flow for direct powder fills, while MCC 101 is often used in granulated fills. Trials on your own filling machine give the best answer.

Can I get a sample for capsule trials?

Yes. Samples of MCC 101 and MCC 102, together with specification, CoA and SDS, are available on request.

Microcrystalline Cellulose from biolla chemicals

biolla chemicals supplies MCC 101 and MCC 102 in USP/EP/BP quality from ISO 9001 production, packed in 20 kg bags with a shelf life of 24 months. We deliver across Europe from Hamburg. Find all details on our product page.

Microcrystalline Cellulose MCC 101 / MCC 102

Request a quote, samples or documents:

Leave a Reply

Your email address will not be published. Required fields are marked *