Sorbitol Powder Specification and CoA: Buyer Checklist (E420)

Sorbitol powder specification explained: identity data, CoA parameters, documents to request and an incoming goods checklist for E420.

A clear sorbitol powder specification is the first thing quality and purchasing teams should agree on before a new supplier or a new lot goes into production. Sorbitol powder (E420, CAS 50-70-4) is used in confectionery, chewing gum, chewable tablets and many other food and pharma formulations, and small differences in moisture, purity or particle size can change how it flows, blends and compresses. This checklist shows which documents to request, which parameters to look at on the specification and the Certificate of Analysis (CoA), and how to approve incoming lots with confidence.

Why the sorbitol powder specification matters

Sorbitol is a sugar alcohol (polyol) that is hygroscopic by nature. Its quality on paper must match what your process needs in practice. A well-defined specification helps you to:

  • compare offers from different suppliers on the same basis
  • approve incoming lots quickly and consistently
  • avoid surprises in flow, blending, tableting or crystallisation
  • support your own HACCP, GMP and customer audits

The specification describes what a product must meet. The CoA confirms the actual test results of one specific lot. You need both.

Sorbitol powder specification: key identity data

Start with the basics. Every document you receive should identify the product unambiguously:

Item What to check
Product name Sorbitol powder (D-sorbitol, D-glucitol)
E number E420
CAS number 50-70-4
EINECS number 200-061-5
Physical form White crystalline powder
Packaging 25 kg bags

Make sure the name, grade and lot number are identical on the specification, the CoA, the SDS and the bag label.

Parameters to review on the specification and CoA

The exact limits depend on your application and on the standard you work to. For food use in the EU, the purity criteria for E420 are set out in Regulation (EU) No 231/2012. For pharmaceutical use, your quality team will usually refer to the relevant pharmacopoeia monograph. Typical parameters to compare include:

Assay and purity

  • Assay (sorbitol content), usually stated on the dried or anhydrous basis
  • Reducing sugars, an indicator of residual glucose
  • Total sugars and other polyols, where specified

Physical properties

  • Water content or loss on drying, important for a hygroscopic material
  • Appearance and solubility, white powder that dissolves readily in water
  • Particle size distribution, which affects flow, mixing and compression

Contaminants and safety

  • Nickel, relevant because sorbitol is produced by catalytic hydrogenation
  • Heavy metals such as lead and arsenic
  • Sulphated ash
  • Microbiological limits such as total aerobic count, yeasts and moulds

Check that every result on the CoA lies within the limits on the specification, and that the test methods are named.

Documents to request from your supplier

For supplier qualification and ongoing purchasing, a complete document set usually includes:

  • Product specification with limits and methods
  • Certificate of Analysis for each delivered lot
  • Safety Data Sheet (SDS) in the language your site requires
  • Statements your QA system needs, for example on allergens or GMO status, as available for the product
  • Sample for lab testing and trial production

If you need a pharmacopoeia grade or a specific certificate, state this clearly in your enquiry. Then the supplier can confirm exactly what is available for that product.

Incoming goods checklist for sorbitol powder

A short, repeatable routine at goods receipt saves time later:

  1. Compare lot number, product name and grade on the bags with the CoA.
  2. Inspect the 25 kg bags for damage, moisture or open seams.
  3. Check the CoA results against your approved specification.
  4. Note the production or retest date and plan your stock rotation (FIFO).
  5. Take a retain sample and test the parameters your process depends on, such as water content.
  6. Store the bags closed, cool and dry, away from humid areas.

Because sorbitol powder absorbs moisture from the air, correct storage keeps it free-flowing after approval. You can find practical tips in our guide on sorbitol powder storage and handling.

Sorbitol powder or sorbitol solution?

Some processes can work with either form. Sorbitol powder is easy to dose in dry blends and tableting. Sorbitol Solution 70% is convenient for liquid processes and is supplied in 1,100 kg IBCs. Each form has its own specification parameters, so make sure you compare the right document. For a detailed comparison, read Sorbitol Solution vs. Sorbitol Powder.

FAQ

What is the difference between a specification and a CoA?

The specification defines the limits a product must meet. The CoA reports the measured results for one specific lot and confirms that this lot complies.

Which regulation sets the purity criteria for E420 in the EU?

The specifications for food additives, including sorbitol E420, are laid down in Regulation (EU) No 231/2012.

Why is water content so important for sorbitol powder?

Sorbitol is hygroscopic. Higher moisture can lead to caking and poor flow, so water content is a key parameter for both approval and storage.

Sorbitol powder from biolla chemicals

biolla chemicals supplies sorbitol powder E420 (CAS 50-70-4) in 25 kg bags to food and pharma manufacturers across Europe, with delivery from Hamburg. Specification, CoA and SDS are available on request, and samples can be provided for your trials. Find all details on our Sorbitol Powder product page.

Request a specification, CoA or a sample today:

Leave a Reply

Your email address will not be published. Required fields are marked *