Delivery across Europe

Rita Brandes
Typically responds within a few minutes

Hey there...
How can we help you?
Sorbitol powder specification explained: identity data, CoA parameters, documents to request and an incoming goods checklist for E420.

A clear sorbitol powder specification is the first thing quality and purchasing teams should agree on before a new supplier or a new lot goes into production. Sorbitol powder (E420, CAS 50-70-4) is used in confectionery, chewing gum, chewable tablets and many other food and pharma formulations, and small differences in moisture, purity or particle size can change how it flows, blends and compresses. This checklist shows which documents to request, which parameters to look at on the specification and the Certificate of Analysis (CoA), and how to approve incoming lots with confidence.
Sorbitol is a sugar alcohol (polyol) that is hygroscopic by nature. Its quality on paper must match what your process needs in practice. A well-defined specification helps you to:
The specification describes what a product must meet. The CoA confirms the actual test results of one specific lot. You need both.
Start with the basics. Every document you receive should identify the product unambiguously:
| Item | What to check |
|---|---|
| Product name | Sorbitol powder (D-sorbitol, D-glucitol) |
| E number | E420 |
| CAS number | 50-70-4 |
| EINECS number | 200-061-5 |
| Physical form | White crystalline powder |
| Packaging | 25 kg bags |
Make sure the name, grade and lot number are identical on the specification, the CoA, the SDS and the bag label.
The exact limits depend on your application and on the standard you work to. For food use in the EU, the purity criteria for E420 are set out in Regulation (EU) No 231/2012. For pharmaceutical use, your quality team will usually refer to the relevant pharmacopoeia monograph. Typical parameters to compare include:
Check that every result on the CoA lies within the limits on the specification, and that the test methods are named.
For supplier qualification and ongoing purchasing, a complete document set usually includes:
If you need a pharmacopoeia grade or a specific certificate, state this clearly in your enquiry. Then the supplier can confirm exactly what is available for that product.
A short, repeatable routine at goods receipt saves time later:
Because sorbitol powder absorbs moisture from the air, correct storage keeps it free-flowing after approval. You can find practical tips in our guide on sorbitol powder storage and handling.
Some processes can work with either form. Sorbitol powder is easy to dose in dry blends and tableting. Sorbitol Solution 70% is convenient for liquid processes and is supplied in 1,100 kg IBCs. Each form has its own specification parameters, so make sure you compare the right document. For a detailed comparison, read Sorbitol Solution vs. Sorbitol Powder.
The specification defines the limits a product must meet. The CoA reports the measured results for one specific lot and confirms that this lot complies.
The specifications for food additives, including sorbitol E420, are laid down in Regulation (EU) No 231/2012.
Sorbitol is hygroscopic. Higher moisture can lead to caking and poor flow, so water content is a key parameter for both approval and storage.
biolla chemicals supplies sorbitol powder E420 (CAS 50-70-4) in 25 kg bags to food and pharma manufacturers across Europe, with delivery from Hamburg. Specification, CoA and SDS are available on request, and samples can be provided for your trials. Find all details on our Sorbitol Powder product page.
Request a specification, CoA or a sample today: