Delivery across Europe

Rita Brandes
Typically responds within a few minutes

Hey there...
How can we help you?
Sodium bicarbonate specification and CoA checklist for buyers: identity data, assay, loss on drying, heavy metals and documents to request for E500(ii).

A clear sodium bicarbonate specification is the starting point for every reliable purchase of this food additive.
Sodium bicarbonate (sodium hydrogen carbonate, E500(ii)) looks like a simple white powder. Yet small differences in purity, moisture or particle size can change how a raising agent reacts in a dough, how fast an effervescent blend releases gas or how well a powder flows in a dosing unit. That is why buyers, QA teams and R&D departments should review the specification, the certificate of analysis (CoA) and the safety data sheet (SDS) before they approve a supplier or release a batch. This checklist explains which documents and parameters matter most.
Sodium bicarbonate releases carbon dioxide when it reacts with acids or when it is heated. This reaction is the reason it is used in bakery products, effervescent powders and many other food applications. The specification defines the quality that makes this reaction predictable from batch to batch.
A good specification protects you in three ways:
Before you look at analytical values, make sure the product is clearly identified on all documents. The following data should match on the specification, CoA, SDS and bag label.
| Item | What to look for |
|---|---|
| Chemical name | Sodium bicarbonate / sodium hydrogen carbonate |
| Formula | NaHCO3 |
| E number | E500(ii) |
| CAS number | 144-55-8 |
| EINECS number | 205-633-8 |
| Grade | Food grade |
| Packaging | 25 kg bags |
A certificate of analysis reports the measured results for one specific batch. Compare each result with the agreed specification limits. These are the parameters buyers usually review.
The assay shows the content of sodium hydrogen carbonate, normally calculated on the dried substance. It is the most important value for dosing, because the amount of carbon dioxide released depends directly on the purity.
This value shows how much moisture the powder contains. Higher moisture can lead to caking in the bag and to an early reaction with acidic ingredients in dry blends. For effervescent and baking powder mixes, low moisture is especially important.
The EU purity criteria for E500(ii) include a test for ammonium salts. The CoA or specification should confirm that the product complies with this test.
Limits for arsenic, lead and mercury are part of the food additive purity criteria. Check that the specification lists these elements and that the batch results are within the limits.
Sodium bicarbonate should be a white, odourless crystalline powder. In addition to the regulatory values, many users agree on application-specific parameters such as particle size distribution or pH of a solution. Fine grades dissolve and react quickly, while coarser grades can give better flow and a more controlled reaction. If your process depends on these properties, include them in your purchase specification.
For supplier qualification and incoming goods inspection, a complete document package saves time. Ask for:
Use this short checklist when a delivery of sodium bicarbonate arrives at your plant:
Proper storage keeps the product within specification until use. Keep bags closed, avoid humid areas and use the first-in, first-out principle. If you want to see how the specification affects real applications, read our guide to sodium bicarbonate in bakery. For pharmaceutical and supplement formats, see our article on sodium bicarbonate in effervescent tablets.
The specification defines the limits a product must meet. The CoA reports the measured results for one batch and shows that this batch complies with the specification.
In the EU, the purity criteria for food additives, including sodium bicarbonate E500(ii), are set out in Commission Regulation (EU) No 231/2012.
Yes. At biolla chemicals, the specification, CoA and SDS are available on request, and samples can be provided for testing.
biolla chemicals in Hamburg is a distributor of food grade sodium bicarbonate E500(ii), CAS 144-55-8, EINECS 205-633-8. The product is supplied in 25 kg bags and delivered across Europe from Hamburg. Specification, CoA and SDS are available on request, as are samples for your own tests. You can find all product details on our sodium bicarbonate product page.
Contact us for documents, samples or a quotation: