Maltodextrin as Carrier for Sensitive Active Ingredients

Maltodextrin as carrier is a proven solution when sensitive active ingredients such as flavours, extracts or vitamins need to be turned into stable, free-flowing powders. It is neutral in taste, dissolves easily and is simple to process.

This guide shows how maltodextrin works as a carrier, which processes use it and how to choose the right grade.

Why Maltodextrin as Carrier Works

  • Neutral taste: it does not mask the flavour of the active ingredient.
  • Film formation: during drying it forms a matrix around the active ingredient.
  • Good solubility: the powder dissolves quickly in water.
  • Low viscosity in solution: high solid contents can be processed.
  • Bulking: it dilutes small amounts of active ingredient for accurate dosing.

Typical Processes

Spray drying

Liquid flavours, juices or plant extracts are mixed with a maltodextrin solution and dried in a spray dryer. The result is a powder in which the active ingredient is embedded in the carrier.

Plating and blending

Small amounts of liquid or powder actives are applied to maltodextrin or mixed with it. This makes premixes easier to dose and distribute evenly.

Vitamin and mineral premixes

In premixes, maltodextrin is often used as a diluent so that very small amounts of vitamins can be added accurately to the final product.

Choosing the Right Grade

Lower DE grades such as DE 10 or DE 15 are less hygroscopic and form stronger films, so they are often preferred as carriers. DE 19 is a versatile choice when good solubility is also important.

How Maltodextrin as Carrier Protects Active Ingredients

When a solution of maltodextrin and active ingredient is dried, the maltodextrin forms a glassy matrix. This matrix surrounds droplets of flavour or extract and reduces their contact with oxygen and moisture.

The result is a powder that is easier to store, dose and transport than the original liquid. Volatile flavour compounds are retained better, and sticky extracts become free-flowing.

Practical Tips for Formulators

  • Dissolve the maltodextrin completely before adding the active ingredient.
  • Adjust the ratio of carrier to active ingredient in small trials.
  • Use emulsifiers or other wall materials if oily actives need extra protection.
  • Check the finished powder for moisture, flow and dissolution.

Quality Parameters to Check

  • DE value and its range in the specification
  • Moisture content
  • Solubility and appearance of the solution
  • Microbiological parameters on the CoA

Applications of Maltodextrin as Carrier by Industry

  • Flavour industry: spray-dried flavours for snacks, soups, desserts and beverages.
  • Beverages: fruit and vegetable juice powders and instant drinks.
  • Food supplements: plant extracts and vitamin premixes in powder form.
  • Colours: natural colour extracts converted into dosable powders.

In all these applications, the documentation of the carrier is part of your own quality file. Ask for the specification, the CoA of each batch and the SDS before the first production run.

FAQ: Maltodextrin as Carrier

Does maltodextrin change the taste of the active ingredient?

Low DE grades are almost neutral in taste. Higher DE grades add a mild sweetness.

How should carrier powders be stored?

Store maltodextrin and finished powders dry and in closed packaging, as they can take up moisture from humid air.

Maltodextrin from biolla chemicals

biolla chemicals supplies maltodextrin made from corn starch in DE 10, 15, 19 and 25 in 25 kg bags. The grades are Ph. Eur., Kosher, Halal certified and non-GMO. Specification, CoA, SDS and samples are available on request, and we deliver across Europe from Hamburg.

Get in touch with our team:

Leave a Reply

Your email address will not be published. Required fields are marked *